This is an in-car video of our second run at World Of Speed 2011. Justin was barely able to keep it straight out of the gates, and we began to drop a cylinder at the 3/4 mile mark course in fourth gear. We ran 114mph at the half mile, and even though we were dropping a cylinder we still ran a 127.5mph in the mile. We ran 2 more runs after this, both slower, and found out that a piece of the head had blown out due to being too thin. We were running a 2332 built from an AS41 case, highly modified 041 head castings, Scat 42X37.5 valves, Auto-Craft 1.4:1 rockers, Scat C75 cam and lightweight lifters (resurfaced by Steve Long Racing Cams), Scat dual valve springs, Mahle 94mm pistons and cylinders custom valve relieved, Scat 84mm Crankshaft and Rods, 1 5/'8" Empi Merged Header, Weber 48 IDA's.